43310600 EasyCharge 6A-1
État des stocks:
Loading
SKU:#
BL369369
Imprimer 116,02EUR
| Marque: | Mastervolt |
|---|---|
| Produit: | Chargeur |
| Unité: | 1 pièces |
| Référence: | 43310600 |
EasyCharge 6A
Waterproof fixed-mount battery chargers
The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The output is completely isolated, and can be used in either series or parallel for higher voltage or current.
Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6 A single bank and 10 A dual bank type models are available.
The battery chargers have the ability to charge wet, AGM and Gel batteries, with a universal input (120-230 V) for total worldwide freedom.
Features
Entry level model with Mastervolt 3-step+ charge characteristic.
Suitable for charging Gel, AGM and flooded batteries.
Full power up to 40 °C.
Quick charging function to extend battery life.
Includes cable & Euro plug (optionally also available with UK plug).
Can charge one battery bank.
Series and parallel configuration.
Stain resistant and waterproof.
International certification.
Specifications
General specifications
Total charge current
6 A at 12 V
Recommended battery capacity: charge (based on 50% discharged battery)
to 120 Ah
Nominal input voltage
120/230 V (90-265 V), 50/60 Hz
AC connection
1.2 m (4 ft) cable + Euro plug
DC connection
ring terminals
Galvanic isolation
yes
Dimensions, hxwxd
76 x 152 x 51 mm
3.0 x 6.0 x 2.0 inch
Weight
1.8 kg
4.0 lb
Compliance
CE, ABYC
Optional
also available with UK plug, product code 43310602
Technical specifications
Charge characteristic
IUoUo, automatic 3-step+ for Gel/AGM/flooded
Temperature range (ambient temp.)
-20 °C to 50 °C
-4 °F to 122 °F
Protection degree
IP68
Protections
spark free, short circuit, reverse polarity, over voltage, current limited, over temperature
MasterBus compatible
no
Waterproof fixed-mount battery chargers
The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The output is completely isolated, and can be used in either series or parallel for higher voltage or current.
Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6 A single bank and 10 A dual bank type models are available.
The battery chargers have the ability to charge wet, AGM and Gel batteries, with a universal input (120-230 V) for total worldwide freedom.
Features
Entry level model with Mastervolt 3-step+ charge characteristic.
Suitable for charging Gel, AGM and flooded batteries.
Full power up to 40 °C.
Quick charging function to extend battery life.
Includes cable & Euro plug (optionally also available with UK plug).
Can charge one battery bank.
Series and parallel configuration.
Stain resistant and waterproof.
International certification.
Specifications
General specifications
Total charge current
6 A at 12 V
Recommended battery capacity: charge (based on 50% discharged battery)
to 120 Ah
Nominal input voltage
120/230 V (90-265 V), 50/60 Hz
AC connection
1.2 m (4 ft) cable + Euro plug
DC connection
ring terminals
Galvanic isolation
yes
Dimensions, hxwxd
76 x 152 x 51 mm
3.0 x 6.0 x 2.0 inch
Weight
1.8 kg
4.0 lb
Compliance
CE, ABYC
Optional
also available with UK plug, product code 43310602
Technical specifications
Charge characteristic
IUoUo, automatic 3-step+ for Gel/AGM/flooded
Temperature range (ambient temp.)
-20 °C to 50 °C
-4 °F to 122 °F
Protection degree
IP68
Protections
spark free, short circuit, reverse polarity, over voltage, current limited, over temperature
MasterBus compatible
no
Waterproof fixed-mount battery chargers The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The outputs are completely isolated, and can be used in either series or parallel for higher voltage or current, including 12 or 24V outputs. Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6A single bank and 10A dual bank types models are available. A key feature is the ‘sense and send’ technology, which allows the chargers to detect which batteries need the most charge and prioritise accordingly. The battery chargers have the ability to charge wet, AGM and Gel batteries, with a universal input (120-230V) for total worldwide freedom. Features, Entry level model with Mastervolt 3-step+ charge characteristic. , Suitable for charging Gel, AGM and flooded batteries. , Full power up to 40 C. , Quick charging function to extend battery life. , Includes cable & Euro plug. , Can charge one or two battery banks. , Sense-Send (10A model): determines which battery is being charged first. , Series and parallel configuration. , Stain resistant and waterproof. , International certification.
Easy Charge
Les colis de 0 à 20 kg sont expédiés à Euro 13,9 avec l'expédition.
La taille maximale est de 200 cm, des colis plus grands sont indiqués pour le fret supplémentaire.
Tous les colis sont envoyés via Track & Trace
Retours pour les clients privés, nous fournissons une politique de remboursement complet de 14 jours. Veuillez nous envoyer un courriel dans les 14 jours suivant la réception. L'email que vous souhaitez annuler votre achat. Vous avez 14 jours à compter de la date à laquelle vous avez déclaré avoir annulé votre achat pour nous envoyer / livrer le colis.
Le droit de retour s'applique à toutes les marchandises qui n'ont pas été fabriquées ou fabriquées / adaptées aux exigences / exigences / spécifications du client.
Ce qui précède s'applique aux ventes aux particuliers.
Aucun remboursement ne sera accordé au B2B / entreprise.
